Skip to main content ↑ ↓
Topic: Dash Gauges just quit working (Read 1894 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Dash Gauges just quit working

My dash gauges on my 2007 Magna 630 Galileo just quit working.
I'm looking for any help on this. I'm exhausted going through electrical panels.
Thanks

Re: Dash Gauges just quit working

Reply #1 –
My initial thought is maybe a bad ground. Start with using a multimeter or 12v test light to verify that you have 12v power to the dash cluster. If you do have 12v power in the wiring, then I'd check the ground.
-Dave
03 Allure 36 - 30897

Re: Dash Gauges just quit working

Reply #2 –
I will check that. The other odd thing is the rear camera quit working as well.
Thanks
2007 Magna 630 Galileo #6762

Re: Dash Gauges just quit working

Reply #3 –
So Brian Moto came out and said that the VORAD system was interfering with the signals. So he disconnected the EVT300 and gauges came back
As far as the rear camera goes, it just had to be reprogrammed. After I disconnected the batteries, it had lost the signal.
I did not know how to reprogram.
Brain is worth it!!!!

Re: Dash Gauges just quit working

Reply #4 –
Our ‘01 Intrigue has a fuse which feeds the instrument panel. You might check the wiring diagrams if you have them.
Don
Yuma, AZ